store
Most iPhone users, at one point or the other, experience various issues with their devices. One of such problems is having an iPhone that won't turn on past the apple logo, especially after the iOS 15 update. If you find yourself in this situation, there is no need to be worried or feel that your device is permanently broken. This article takes a detailed look at iPhone won't turn on past Apple logo problems and proffers the right solution to fix it. Read on to know more.
Why Does My iPhone Not Turn on Past the Apple Logo?
There are so many reasons why your iPhone won't turn on past Apple logo. Some of these include:
- Physical damage: If you accidentally dropped your phone on the floor, it may cause some damage to the internal hardware and affect the phone's ability to boot. Also, a little droplet of water is capable of making your iPhone not turn on past the Apple logo.
- Software issues: iPhone won't turn on past the Apple logo may be a result of software issues caused by a failed iOS 15 update or using an old version of the iOS.
How to Solve iPhone Won't Go Past the Apple Logo Issues
1. Drain the Battery and Charge
The first thing to do if your iPhone won't turn on past the Apple logo is to check the battery. If your battery has problems during the iOS 15 update, the iPhone is very likely to suffer from this issue. Then drain the battery until the power is down to 0%. That’s to say, put your iPhone aside until it switches off automatically. Then plug it into a wall socket using the original charger. Let your phone charge for up to 3 hours until it reaches 100%. You should avoid using the phone while charging too.
2. Force Restart iPhone
Force restarting iPhone can sometimes help in fixing your iPhone that won't turn on past the Apple logo. During this process, some bugs of the operating system may be eliminated, especially those happens during the iOS 15 update. And you can follow the steps below based on your iPhone version.
- To force restart an iPhone 6 and earlier versions, press and hold the Power and Home buttons simultaneously for up to 10 seconds until the Apple logo disappears and reappears on the screen.
- To force restart an iPhone 7 and 7 Plus, press and hold Power and Volume Down buttons at a time until the Apple logo disappears and appears again on the screen.
- To force restart an iPhone 8 or newer models including iPhone 12, press and release the Volume Up button, and then do the same for the Volume Down button, finally press and hold the Side button until the Apple logo disappears and reappears.
3. Use All-in-One iOS Repair Tool Umendit
One of the best ways to fix this type of issue is using a professional third-party tool. One of such tools to fix the iPhone won't turn on past Apple logo problems is Umendit. This all-in-one iOS tool fixes a wide range of issues with a high success rate. Most importantly, the advanced technology enables it to repair all iOS/iPadOS/tvOS issues without data loss. It is available in three different modes that can fix your iPhone problem quickly. What's more, it is compatible with all iOS versions including the newest iOS 15. Here is a detailed step in using this tool:
Secure Download
- 1 Download and install the software on your system. Choose the Standard Repair. Then, using a USB cord to connect your iPhone to your PC and click Next.
- Check to be sure that your device can be detected. If it isn't detected, put your iPhone in DFU or recovery mode. Steps on how to put your iPhone into the two modes will be shown on the screen; please follow the prompt.
- 2 Next, the program will recognize your device and provide different firmware. Choose and download a suitable version for your device.
- 3 After the firmware has been downloaded, click on Start. The program will automatically fix your device. Your device will restart and turn on past the Apple logo normally after that.
4. Update/Restore iPhone via iTunes/Finder
It is vital to note that updating your iPhone via iTunes or Finder may solve this problem without data loss. However, the success rate is quite low and this issue may still exist even after updating the iPhone to the latest iOS 15. You can opt for the restore option, which leads to data loss but has a higher success rate.
To update or restore iPhones via iTunes/Finder, install the latest iTunes on your PC and open it. Connect your device to the computer using a USB cord. Then put your iPhone into recovery mode. Here is the detailed guide on how to put different iPhones in recovery mode.
- For iPhone 8 and newer models: Press and release the Volume Up button; do the same for the Volume Down button. Then press and hold the Side button until the recovery mode screen appears. Please do not release the buttons when you see the Apple logo.
- For iPhone 7 and iPhone 7 Plus: Press and hold the Side and Volume Down buttons at the same time., Keep holding until your phone goes into recovery mode. Don’t release the buttons when the Apple logo appears.
- For iPhone 6 and older models: Press and hold the Home and Side buttons at the same time. Keep holding until your phone goes into recovery mode. Don’t release the buttons when the Apple logo appears on the screen.
Then your iPhone will be detected, and a window pops up with Update button and Restore button. Choose to either update or restore your device, then confirm your action.
5. DFU Restore iPhone
DFU restoration should be the last option to take when seeking a solution to the issue that iPhone won't turn on past the Apple logo. To do this, you need to put your phone in DFU mode first. The steps below are for different iPhone models.
For iPhone 8 and newer models:
- Press and release the Volume Up button and then do the same for the Volume Down button.
- After that, press and hold the Side button until the screen goes black.
- As soon as the screen turns black, press and hold the Volume Down button while still holding the Side button.
- Release the Side button after 5 seconds but keep holding the Volume Down button until a pop-up window shows that it has detected an iPhone in recovery mode on iTunes/Finder. Your iPhone screen should stay black at this time.
For iPhone 7 and 7 Plus:
- Press and hold the Power and Volume Down button for about 8 seconds.
- Then release the Power button and keep holding the Volume Down button until a pop-up window appears on the iTunes or Finder and says that it has detected an iPhone in recovery mode. Your iPhone screen should stay black at this time.
For iPhone 6 and older models:
- Press and hold the Power and Home button for 8-10 seconds.
- Then release the Power button but keep holding the Home button for at least 5 seconds. And you will see a pop-up window appears on the iTunes or Finder and says that it has detected an iPhone in recovery mode. Your iPhone screen should stay black at this time.
Finally, you can click OK and then Restore iPhone to fix the iPhone won't turn on past the Apple logo issue.
6. Contact Apple
If all the methods above fail, then it is possible that the problem is caused by a hardware glitch. Therefore you need to visit an Apple Store. At present, there are so many Apple authorized stores with experienced technicians in various parts of the world that can help you fix this problem. The team of technicians will carry out a check on your phone and proffer solutions that get your device back to full functionality again.
Conclusion
If you have an iPhone that won't turn on past the Apple logo, there is no need to be worried. This problem can be fixed by following the simple steps listed above. Most importantly, the all-in-one iOS tool known as Umendit is all you need to get your device back to full functionality. It is a safe tool that can repair your iPhone without data loss. Just download and give it a try!
Secure Download